Opening a PS2 can be a complicated process and can damage it if done incorrectly. If you don’t feel confident, it is advisable to seek assistance from a technical expert.
If you decide to do it yourself, follow these steps:
Materials Required:
- Cross-head screwdriver
- Soft, lint-free cloth
- Isopropyl alcohol (99% purity)
Clean Laser Steps:
- Make sure the console is completely off and not connected to a power supply.
- Remove the screws located on the back of the console.
- Carefully remove the top cover.
- Carefully remove the cables and hard drive as needed to access the laser unit.
- Dip a clean, lint-free cloth in isopropyl alcohol.
- Gently clean the laser lens. Do not apply hard pressure.
- Use a dry cloth to remove excess alcohol.
- Reconnect all removed cables and the hard drive.
- Put the top cover back on and tighten the screws.
- Connect the console to the power supply and turn it on.
- Insert a game disc and see if it reads properly.
Note:
- Do not apply too much pressure while cleaning the laser lens, as this may damage the lens.
- If you still face problems after cleaning the laser lens, it is recommended to consult a technical expert.
Always exercise caution and act at your own risk.